Vacuum Feedthroughs, Electric Heating Elements, Custom Thermal Systems, Ceramic Metallization, Thick Film Technology, Precision Laser Machining & More

Custom Vacuum Feedthroughs by BCE

BCE Epoxy Vacuum Feedthroughs

Designer, why conform your designs to a vendor spec, when BCE will adapt to yours?

Sixty years of high-tech design experience in semiconductor equipment, medical equipment and R&D yields one of BCE's most innovative products.

Equipment manufacturers and scientific researchers are continually challenged with supplying power, fiber-optic, control, and monitoring cables into (and out of) sealed vacuum vessels. Whether due to space restrictions, special geometries, or number and type of conductors, standard glass-to-metal or ceramic feedthroughs never quite fit the bill. Unfortunately, because of limited options, many designers are forced to compromise and go for an off-the-shelf solution.

You don't have to compromise anymore.

Epoxy to the rescue. During the past decade, new epoxy compounds have been developed that rival glass and ceramic in performance. BCE is at the forefront of this development and leverages modern epoxy's unique properties to solve your feedthrough challenges.

With modern epoxy feedthroughs, any kind of standard or custom connector is sealed in a completely potted, high-performance, clear epoxy compound. Epoxy seals offer countless design options, and most amazingly, performance equal to or better than glass or ceramic. Better yet, pricing is very competitive and quick turn-around for prototypes and short production runs are not a problem.

BCE custom epoxy vacuum feedthroughs offer the best choice in application flexibility, cost, and high performance. Epoxy feedthroughs are the right product for today’s fast moving markets. If you have to pass an electrical, pneumatic, or fiber-optic signal through a vacuum chamber wall, THINK OF BCE!

The Advantages of Epoxy Feedthroughs Over Glass and Ceramic

  • Custom shapes, angles and conductors no problem.
  • Run wires (and shielding), pneumatic tubing, or fiber-optic cables.
  • Cost effective compared to glass and ceramic.
  • Short runs and prototypes available quickly.
  • Meets NASA specs on outgassing.
  • Clear epoxy allows for visual inspection.
  • Mounting directly to printed circuit boards and flex-circuits.
  • Eliminates voltage drop or contact resistance.

REQUEST MORE INFO HERE

Please fill out the quick form below and we'll follow-up immediately.
*Name 
*Company 
*Email 
*Phone 
*Application details or question 
* Required Field
21060 Corsair Blvd. Hayward, CA 94545 | (510) 274-1990
© Copyright Belilove Company - Engineers. All Rights Reserved. Site by CMS4i.