Environmentally Friendly Mini Clean Flow Replaces Gas Burner System
BACKGROUND
The application involved using environmentally friendly electric heat replacing a gas burner type system. The engineering request was to conform to a direct replacement 3” stainless tubing while utilizing BCE’s Mini Clean Flow In-line design. The challenge was building the right inlet and outlet fittings in-line for a seamless change in the air heating process (gas to electric). Electrically isolated elements in the air stream were required with a high temperature thermocouple assembly near the outlet.
Download Case Study (PDF)
SCOPE
Mini Clean Flow - Hi Wattage needed to satisfy the following:
- Temperature 482°C to 648°C
- Internal element must be able to withstand temperature <750°C and be electrically isolated
- 3” outside diameter, no insulation
- A sanitary fitting on the inlet with an NPT on the outlet
- A cold section on the heat source was required with fiberglass leads
- 304 stainless steel material on the heat source and vessel
- Type “J” Thermocouple able to withstand high temp at the outlet
- 480Volt, 7,000Watt (+/-10%)
OUTCOME
BCE produced a highly effective Mini Clean Flow heater meeting the delta “T” requirements during the final testing. We were able to pressure test the part to 90PSI @ 20?C-25? without any visible leaks in the weld or braze joints. A thorough quality inspection was completed on the heater source with final cleaning using isopropyl alcohol and dry air.
BCE Engineering & Quality Assurance
BCE engineers provide decades of experience in design and development, delivering a wealth of empirical data and experience. BCE welcomes your custom requirement and will design and deliver a part that meets your challenging needs.
BCE is recognized for its commitment to quality and excellence by being certified in accordance with ISO 9001:2015.
